Management Review 46(2), 2004.
M. W. Toffel, A. Horvath, "Environmental
implications of wireless technologies: News delivery and business meetings,"
Environmental Science & Technology 38(11), 2004.
Michael W. Toffel, J. Marshall, "Comparative
analysis of weighting methods used to evaluate chemical release
inventories," Journal of
Industrial Ecology 8(1), 2004.
MW Toffel and JD Marshall, "Comparative
analysis of weighting methods used to evaluate chemical release inventories,"
Journal of Industrial Ecology, in press, 8(1): 2004.
Stokes, J., and Horvath, A. (2004) "Life-cycle Assessment of
Alternative Water Supply Systems in California.
"
Proceedings of the 2004 A&WMA Annual Meeting, Indianapolis, IN.
2003
Jolliet, O., Margni, M.,
Charles, R., Humbert, S., Payet, J., Rebitzer,
G., and
Rosenbaum, R., IMPACT 2002+: A New Life Cycle Impact Assessment
Methodology, Int J LCA 8 (6) 324-330, 2003.
Frischknecht, R., Jungbluth, N., Althaus, H.-J.,
Doka, G., Dones, R.,
Hirschier, R., Hellweg, S., Humbert, S., Margni, M.,
Nemecek, T. and
Spielmann, M., Implementation of Life Cycle Impact Assessment Methods,ecoinvent report No. 3. Swiss
Centre for Life Cycle Inventories,
Duebendorf, 2003.
Junnila, S., and Horvath, A. (2003),
"
Life-cycle Environmental Effects of an Office Building
" J.
of Infrastructure Systems, ASCE, 9(4).
Kitou, E., and Horvath, A. (2003),
"
Energy-related Emissions from Telework. Environmental
Science & Technology, ACS, 37(16), pp. 3467-3475.
Guggemos, A., and Horvath, A. (2003),
"
Strategies of Extended Producer
Responsibility for Buildings" J. of Infrastructure
Systems, ASCE, 9(2), pp. 65-74.
Borg, R. F., Gambatese, J., Haines, Jr., K.,
Hendrickson, C. T., Hinze, J., Horvath, A.,
Koehn, E., Moritz, S. L. (2003),
"
Rebuilding the World Trade Center," Practice
Periodical on Structural Design and Construction, ASCE, 8(3), pp. 137-145.
Michael W. Toffel. "Closing
the loop: Product take-back requirements and
their strategic implications" Corporate Environmental Strategy 10(9),
2003.
Junnila, S., and Horvath, A. (2003),
"
Environmental Sensitivity Analysis
of the Life-cycle of an Office Building," 2nd International Symposium on Integrated
Life Cycle Design of Materials and Structures, ILCDES,
Kuopio, Finland.
Michael W. Toffel. "The
growing strategic importance of end-of-life product management"
California Management Review, 45(3): 102-129. (2003)
Michael W. Toffel,
Natalie Hill & Kellie A. McElhaney. "Developing a Management Systems Approach to
Sustainability at BMW Group" Corporate Environmental Strategy 10(2):
29-39. (2003)
Michael W. Toffel,
Natalie Hill & Kellie A. McElhaney. "BMW Group's Sustainability Management System:
Preliminary Results, Ongoing Challenges, and the UN Global Compact"
Corporate Environmental Strategy 10(3): 51-61.(2003)
Guggemos, A., and Horvath, A. (2003)
"
Framework for Environmental
Analysis of Commercial Building Structures," Proceedings of
the Construction Research Congress, ASCE, Honolulu, HI.
Masanet E, Newton M, Auer R, "Practical Aspects of the
Materials Declaration Process", Proceedings of the IEEE International
Symposium on Electronics and the Environment, Boston, MA, 2003.
White CD, Masanet
E, Rosen CM, Beckman S, "Product Recovery With Some Byte: An Overview
of Management Challenges and Environmental Consequences in Reverse
Manufacturing for the Computer Industry" Journal of Cleaner
Production, 11 (4),445-458, 2003.
2002
Rosen CM, Beckman S, Bercovitz
J, "The Role of Voluntary Industry Standards in Environmental Supply
Chain Management: An Institutional Economics Perspective," 6 Journal
of Industrial Ecology (Summer-Fall 2002), 103-124.
Toffel, Michael & Lawrence
R. Birkner "Estimating and Controlling
Workplace Risk-An Approach for Occupational Hygiene and Safety
Professionals" Applied Occupational and Environmental Hygiene
(July, 2002).
Masanet E, Auer R, Tsuda D, Barillot T, Baynes A,
"An Assessment and Prioritization of 'Design for Recycling' Guidelines
for Plastic Components", Proceedings of the IEEE International
Symposium on Electronics and the Environment, San Fransicso,
CA, 2002.
Masanet E, "Assessing Public Exposure to
Silver-Contaminated Groundwater from Lead-Free Solder: An Upper Bound,
Risk-Based Approach", Proceedings of the IEEE International Symposium
on Electronics and the Environment, San Fransicso, CA,
2002.
Pacca, S., and Horvath, A.,
"
Greenhouse Gas Emissions from
Building and Operating Electric Power Plants in the Upper Colorado River Basin.
"
Environmental Science and Technology, ACS, 36(15), August 1,
2002.
Borg, R. F., Gambatese,
J., Haines, Jr., K., Hendrickson, C. T., Hinze,
J., Horvath, A., Koehn, E., Moritz, S. L. (2002),
"
Rebuilding the World Trade Center.
"
Technical Report. American
Society of Civil Engineers, Construction Institute.
Kitou, E., Horvath, A., and Masanet,
E. (2002),
"
Putting
in Perspective the Contribution of Transportation to the Environmental
Effects of Telework.
"
81st Transportation Research Board
Conference, Washington, D.C.
Catherine P. Koshland
and Susan L. Fischer. "Control of Air Toxics
Emissions." Applied Combustion Diagnostics, Taylor and Francis, 2002.
Krishnan, N., Raoux,
S., "Copper CMP wastewater treatment and recycling: Exploring
opportunities for Point-of-Use (POU) solutions," Applied Materials
Engineering Technology (ET) Conference, 2002
Krishnan, N., Woolston,
M., Dornfeld, D., "Exploring Environmental Cost
of Ownership of Perfluorocarbon (PFC) Abatement Options
and Decision Spaces using the Environmental Value Systems (EnV-S) Analysis," Environmental Technologies and
Manufacturing Practices, SEMICON West 2002
Krishnan, N, "Understanding drivers,
benefits and shortcomings of Life-Cycle Assessment (LCA): Strategies
for a successful implementation in process type industries," EH&S
Performance and Corporate Responsibility: Building Bridges and Competitive Advantage, Pacific Industrial and Business
Association, 9th Annual Silicon Valley EH&S Conference, February 26 and
27, 2002
Krishnan, N., Ayyagari,
U., Dornfeld, D., "A Framework for Integration of
Fundamental Physical-Chemical Modeling to inform Environmental Decision
Making: A Case study using the Environmental Value Systems Analysis,"
ESRC Report, 2002
2001
Matthews, H. S., Hendrickson, C. T., and
Horvath, A.,
"
External Environmental Costs of Transportation Equipment,
Materials and Services Production.
"
J. of Infrastructure Systems, ASCE, March, pp. 111-117, 2002.
Kitou E, Masanet E, Horvath
A, "
Web-based tool for estimating the
environmental impacts of telecommuting ," Proceedings of the IEEE
International Symposium on Electronics and the Environment, Denver, CO,
2001.
Susan L. Fischer, "Biomass-derived
liquid cooking fuels for household use in rural China: potential for reducing health costs and
mitigating greenhouse gas emissions," Energy for Sustainable
Development, vol. 5, no. 1, March 2001.
Bauer, D., Krishnan, N., Francis, T,
'Creating Win-Win: Leveraging Insight Into Industrial Environmental
Decision-Making,'Fourth International Symposium
on Environmental Issues with Materials and Processes for the Electronics
and Semiconductor Industries, 199th Meeting of the Electrochemical Society,
Washington, DC,
March 25-30, 2001
2000
Krishnan, N., Thurwachter,
S., Francis, T. Sheng, P., 'A Modular
Environmental Design and Decision-Support Tool (EDDT) for Semiconductor
Manufacturing,' Improving Environmental Performance of Wafer
Manufacturing Processes, Proceedings, SEMICON West, 2000, 2000
Thurwachter, S., Francis, T., 'Using Design Software to
Minimize the Environmental Impact of Tools and Processes,' Green and Clean,
Micro Magazine, July 2000
Krishnan, N., Bauer, D., Francis, T., Dornfeld, D. 'From Decision Analysis To System Selection
For Copper CMP Wastewater Treatment Systems: Using The Environmental
Value Systems (EnV-S) Analysis, Multilevel
Interconnection, SEMI Technology Symposium, December 6-8, Makuhari, Chiba, Japan, 2000
Krishnan N, Thurwachter
S, Francis T, Sheng P, "The Environmental
Value Systems (EnV-S) Analysis: Application
to CMP Wastewater Treatment Options", Third International Symposium on
Environmental Issues with Materials and Processes for the Electronics
Semiconductor Industries, 197th Meeting of the Electrochemical Society, May
14-18, Toronto, Canada (2000)
Krishnan, N., Bauer, D. , Thurwachter, S., Francis, T., Sheng,
P, 'Environmental Value Systems (EnV-S)
Analysis,' Seventh Annual International Semiconductor Environmental Safety
And Health (ISESH) Conference, June 25-29, 2000
Bauer D, Sheng
P, "Integration of Functional and Environmental Performance Design
Decisions: A Mechanical Component Case Study" Journal of Industrial
Ecology 3:4, 2000.
Hendrickson, C. T., and Horvath, A.
(2000), "Resource
Use and Environmental Emissions of U.S. Construction Sectors.
"
J. of Construction Engineering and
Management, ASCE, January-February, pp. 38-44.
Horvath, A. (2000),
"Alternative Fuel Vehicles:
Environmental and Economic Effects of Infrastructural Requirements.
" Proceedings of the 2000 SAE Total Life
Cycle Conference, Detroit, MI.
Kitou, E., Horvath, A., and Blazek, M. (2000)
,"
Environmentally
Preferable Purchasing: A Survey of the Telecommunications Industry.
"
Proceedings of the 2000 IEEE
International Symposium on Electronics and the Environment, San Francisco, CA.
Toffel, Michael, "Anticipating Greener Supply
Chain Demands: One Singapore Company's Journey to ISO 14001" in:
Ruth Hillary [ed.]: ISO 14001: Case Studies and Practical Experiences. Greenleaf Publishing, Sheffield, UK (2000).
Susan L. Fischer, contributing author to
"Energy, the environment, and health," John P. Holdren and Kirk R. Smith, in World Energy
Assessment: Energy and the Challenge of Sustainability, New York: United Nations Development Program, 2000.
1999
Thurwachter S, Schoening J, Sheng P, "Design Tool for Semiconductor Process
Tools," SEMI Environmental Impacts of Process Tools Technical Programs
Proceedings, SEMICON West 99, 1999.
Thurwachter S, Schoening J, Sheng P, "Environmental Value (EnV)
Analysis," 1999 IEEE International Symposium on Electronics and the
Environment Conference Proceedings (Vol. 7, 1999), pp.70-75.
Dornfeld D., Wright P. K., Wang F-C., Sheng
P., Stori J., Sundararajan
V., Krishnan N., and Chu C-H., Multi-A gent
Process Planning for a Networked Machining Service,' to be presented at the
twenty seventh North American Manufacturing Research Conference, May 25-28,
University of California at Berkeley, Berkeley, California
1998
Domkondwar V., Krishnan N., Bauer D., Sheng
P., 'Distributed Modules in Environmental Part Planning for Machined
Components,' CIRP 5th International Seminar on Life Cycle Engineering,
September 16-18 1998, pp. 227-239, Stockholm, Sweden
Sheng P., S. Siddhaye, P. Worhach,
"Distributed 'Agents' For Printed Circuit Board Design For
Environment", 31st CIRP International Seminar on Manufacturing
Systems, Berkeley, CA,
June 1998
Siddhaye S., Sheng P.,
"Evaluating the Environmental Factors for Pre-Layout Board
Design", IEEE International Symposium on Electronics and the
Environment, Conference Proceedings, Oak Brook, IL, May 4-6, 1998
S. Siddhaye
and P. Sheng, "Integration of Environmental
Factors in Pre-Layout Design Optimization for Printed Circuit Boards",
Journal of Electronics Manufacturing, March 1998
P Sheng, D Bennet, S Thurwatcher Environmental-Based Systems Planning for
Machining, Transactions of CIRP, 1998
P Sheng, D
Bauer, JW Sutherland, T Cao, A Gandhi, RE DeVor, SG Kapoor, S Skerlos Web Based Cutting Fluid Evaluation Software,
31st CIRP International Seminar on Manufacturing Systems
Diana J. Bauer, Sara Thurwachter,
Paul S Sheng Integration of Environmental Factors
in Surface Planning: Part 1 -- Mass and Energy Modeling, Transactions of
NAMRI, Vol. 26, 1998
Sara Thurwachter,
Diana J Bauer, Paul S Sheng Integration of
Environmental Factors in Surface Planning: Part 2 -- Multi-Criteria Hazard
Control, Transactions of NAMRI, Vol. 26, 1998
P. Sheng, V.Carey, D. Bauer, S. Thurwachter,
J. Creyts, D. Bennett Environmental Planning for
Machining Operations and System, Proc. 1998 NSF Design and Manufacturing
Grantees Conference (Jan. 1998, Monterrey, Mexico),
Connelly, L. and Koshland,
C. Strengthening the IE Ecosystem Analogy, Part 1: An Exergy-Based
Definition of Consumption and A Thermodynamic Interpretation of Ecosystem
Evolution , Submitted to the Journal of Inducstrial
Ecology
Connelly, L. and Koshland,
C. Strengthening the IE Ecosystem Analogy, Part 2: An analytical framework
for evaluating the interdependent roles of cycling, efficiency gains, and
renewed energy use in de-linking consumption from depletion, Submitted to
the Journal of Industrial Ecology
1997
D. Bauer and P. Sheng,
Interaction of Process Mechanisms and Environmental Effects in Secondary
Finishing, Procedings from the ASME Conference on
Concurrent Product Design and Environmentally Conscious Manufacturing, Dallas, 1997
D. Bauer, S. Thurwachter,
P. Sheng and D. Bennet,
Tools for Assessing Metalworking Fluid Hazards in Component Design and
Manufacturing Planning, Procedings from the 1997
AAMA Symposium on Metal Removal Fluids in the Metalworking
Environment
Sheng, P. and S. Oberwalleney,
Life-Cycle Planning of Cutting Fluids - A Review, ASME Journal of
Manufacturing Science and Engineering.
Srinivasan, M. and P. Sheng,
Feature Based Process Planning for Environmentally-Conscious Machining -
Part 1: MicroPlanning, ASME Journal of
Manufacturing Science and Engineering.
Srinivasan, M. and P. Sheng,
Feature Based Process Planning for Environmentally-Conscious Machining -
Part 2: MacroPlanning, ASME Journal of
Manufacturing Science and Engineering.
Sutherland, J., T. Cao,
C. Daniel, Y. Yue, Y. Zheng,
P. Sheng, D. Bauer, M. Srinivasan,
R. DeVor, S. Kapoor and
S. Skerlos, CFEST: An Internet-Based Cutting Fluid
Evaluation Software Testbed, Transactions of
NAMRI, Vol.25, 1997.
Srinivasan, M. and P. Sheng,
"Uncertainty Factors in Process Planning for Environmentally-Conscious
Machining, Transactions of NAMRI, Vol. 25, 1997.
Bennett, D. and P. Sheng,
Facility Modeling for Environmentally-Conscious Machining, Proc. ASME IMECE
Symposium on Environmentally Conscious Design and Manufacturing (Dallas,
TX, Nov. 1997).
Sheng, P. and E. Hertwich,
Indices for Comparative Waste Assessment in Environmentally-Conscious
Manufacturing, ASME Journal of Manufacturing Science and Engineering
(August 1997).
Worhach, P. and P. Sheng,
Integration of Environmental Factors for Process Modeling of Printed
Circuit Board Assembly, Proc. IEEE Intl. Symposium on Electronics and the
Environment(May 1997, San Francisco, CA).
Siddhaye, S. and P. Sheng,
Integration of Environmental Factors for Process Modeling of Printed
Circuit Board Fabrication, Proc. IEEE Intl. Symposium on Electronics and
the Environment(May 1997, San Francisco, CA).
Sheng, P., D. Bauer and P. Worhach,
Environmentally-Conscious Manufacturing Advisors for Electronic Products,
Proc. 1997 NSF Design and Manufacturing Grantees Conference (Jan. 1997,
Seattle, WA), pp. 399-400.
Creyts, J. and V. Carey, Use of Extended Exergy Analysis as a Tool for Assessment of the
Environmental Impact of Industrial Processes, Proc. ASME IMECE Symposium on
Thermodynamics and the Design, Analysis and Improvement of Energy Systems
(Dallas, TX, Nov. 1997), accepted.
Connelly, L. and Koshland,
CP. Two aspects of consumption: Using and exergy-based measure of degradation to advance the
theory and implementation of industrial ecology, Resources, Conservation
and Recycling(1997), 19:199-217.
1996
M. Srinivasan,
Multi-Objective Process Planning in Environmentally Conscious
Manufacturing, Ph.D. Dissertation, May 1996.
Sheng, P. and M. Srinivasan,
A Hierarchical Part Planning Strategy for Environmentally-Conscious
Manufacturing, Annals of the CIRP (Vol. 45, No. 1, 1996), pp.
455-460.
Sheng, P. and M. Srinivasan,
"Green Agents for Distributed Manufacturing, Proc. 1996 Japan-USA
Symposium on Flexible Automation (July 1996, Boston, MA), pp.
1111-1118.
Mattis, J., P. Sheng, K. Leong and W. DiScipio, A
Framework for Analyzing Injection-Molding Die Design, Proc. IEEE Intl.
Symposium on Electronics and the Environment (May 1996, Dallas, TX), pp.
207-212.
Hertwich, E., P. Sheng and C. Koshland, A Flexible Method for Including Environmental
Toxicity in DFE and LCA, Proc. IEEE Intl. Symposium on Electronics and the
Environment (May 1996, Dallas, TX), pp. 269-274.
Sheng, P., S. Beckman, C. Rosen, P. Worhach and J. Berkovitz,
Hierarchical Metrics for Environmentally-Conscious Manufacturing, Proc.
1996 NSF Design and Manufacturing Grantees Conference (Jan. 1996,
Albuquerque, NM), pp. 237-238.
O'Rourke, D., Connelly, L., and Koshland, C.P. Industrial Ecology: A Critical Review,
International Journal of Environment and Pollution(1996),
6(2/3):89-112.
1995
Munoz, A. and P. Sheng,
An Analytical Approach for Determining the Environmental Impact of
Machining Processes, Journal of Materials Processing Technology (Vol.
53, No. 3-4, 1995), pp. 736-758.
Gune, P. and P. Sheng,
Influence of Site Specific Factors in Environmentally-Conscious
Manufacturing, Proc. ASME IMECE Symposium on Life-Cycle Engineering (Vol.
MED 2-2, Nov. 1995, San Francisco, CA), 861-870.
Sheng, P. and J. Sutanto,
Environmental Factors In Parametric Design of Computer Chassis, Journal of
Electronics Manufacturing (Vol. 5, No. 3, Sept. 1995), pp. 199-216.
Sheng, P., D. Dornfeld and
P. Worhach, Integration Issues in Green Design
and Manufacturing, Manufacturing Review (Vol. 8, No. 2, June 1995),
pp.95-105.
Sheng, P., B. Willis III, and A. Shiovitz,
Influence of Computer Chassis Design on Metal Fabrication Waste Streams, Proc. IEEE Intl. Symposium on Electronics and the
Environment (May, 1995, Orlando, FL), pp. 209-215.
Beckman, S., P. Worhach
and P. Sheng, "Supply Chain Management for
Environmentally-Conscious Computer Manufacturing," Proc. IEEE Intl.
Symposium on Electronics and the Environment (May, 1995, Orlando, FL), pp.
235-239.
Srinivasan, M., T. Wu and P. Sheng,
Development of a Scoring Index for the Evaluation of Environmental Factors
in Machining Processes: Part 1 - Health Hazards Score Formulation, Transactions of NAMRI (Vol. 23, 1995), pp.
115-122.
Sheng, P. and M. Srinivasan,
Multi-Objective Planning in Environmentally-Conscious Manufacturing: A
Feature-Based Approach, Annals of the CIRP (Vol. 44, No. 1, 1995), pp.
433-437.
1994
Sheng, P., P. Worhach and P.
Gune, A Network Optimization Framework for
Environmentally-Conscious Process Planning and Product Design, Proc.
TIMS-ORSA Conference (Anchorage Alaska, June 1994).
